Adjusters Timing & Adjusting Service Manual for Singer 201 & 1200 Sewing Machine

Description

68-Page
Adjusters
Manual
for
SINGER
SEWING MACHINES
201-1,
201-2, 201-3, 201-4 and 1200-1
*********
Timing
and Adjusting Instructions
for
Servicing,
Adjusting and Repairing
Singer
Sewing Machines
of
Classes
201
and 1200
*********
Instruction Manual.  (Photo 03)
This
is NOT a standard “Xerox”
copy
of the Singer manual!
This
manual is professionally printed
on
the same heavy-weight brilliant-white paper as the
original
Singer manual!
Brilliant-white
heavy-weight paper
. 
(photo 19)
Description:
This
listing is for a professional reproduction of the Singer
Manufacturing Co. “Adjuster’s Manual for Singer Machines 201-1,
201-2, 201-3, 201-4 and 1200-1 Lock Stitch Reversible Feed Sewing
Machines.”
The
manual also includes instructions for the Singer P.H. and B.R. Sewing
Machine motors as well as for the Singer Bakelite speed controller
pedal.
This
is NOT a standard “Xerox” copy of the Singer manual! It is
professionally printed on the same brilliant-white heavy-weight
chrome paper as the original Singer manual! It is super clean, the
text and the illustrations are very sharp, and it is nearly identical
in size and in paper type to the original Singer manual.
Unlike
the original 80 year old manual that has become frail, brittle,
mildewed, stained and yellowed after so many years, this manual looks
like an original Singer manual that has been preserved in NEW
CONDITION!
Just
like the Singer company printed their manual on their in-house
printing press, we printed this manual on our in-house printing
press. This manual may also serve you for the next 80 years.
In
fact, if we didn’t tell you,
you
could not tell the difference
between
this manual and the
original
manual!
This
full-size 68-page Instruction manual is complete and very clean with
no “black dots,” smudges, stains, or any other
imperfections. No pages are missing, dirty, or damaged. The manual
includes descriptions and illustrations which will show you how to do
the following:
·
Description
·
Motors
for machines 201-2 and 201-3
·
Singer
P.H. Motors for machine 201-2
·
Singer
B.R. Motors for machine 201-3
·
Insure
correct demonstration of the machine
·
Electrical
connections for machines 201-2 and 201-3
·
Machine
201-2, Singer P.H. motor, Singerlight and controller
·
Singerlight
leads
·
Controller
leads
·
Machine
201-3, Singer B.R. motor, Singerlight and controller
·
Singerlight
leads
·
Controller
leads
·
Using
the Bakelite controller
·
Using
for foot control
·
Using
for knee control
·
Causes
of trouble with machines of class 201
·
Causes
of low speed or failure to run
·
Heavy
or gummed lubricant
·
Too
much presser foot pressure
·
Machine
Binds
·
Motor
causes of trouble with machines 201-2 and 201-3
·
Electric
current not turned on
·
Loose
or broken electrical connections
·
Motor
not suited for electric supply
·
Dirty
commutator
·
Carbon
brushes not making contact
·
Armature
binding
·
Machine
201-2
·
Machine
201-3
·
Causes
of binding machine 201-2 and 201-3
·
Machine
201-2 only
·
Machine
201-3 only
·
Broken
armature wires
·
Controller
not properly adjusted
·
Inspect
electrical connections, machine 201-2
·
Three-pin
terminal
·
Motor,
machine 201-2
·
Singerlight,
machine 201-2
·
Remove
Singerlight shade, machine 201-2
·
Inspect
Singerlight connections, machine 201-2
·
Reassemble
the Singerlight, machine 201-2
·
Replace
Singerlight, machine 201-2
·
Remove
Singerlight leads from the machine arm, machine 201-2
·
Replace
the Singerlight leads, machine 201-2
·
Replace
the three-pin terminal, machine 201-2
·
Instructions
for machines 201-2 and 201-3
·
Tree-pin
terminal plug
·
Singerlight
fails to light, machines 201-2 and 201-3
·
Remove
and replace the bulb, machines 201-2 and 201-3
·
Remove
the motor, machine 201-2
·
Disassemble
the motor, machine 201-2
·
Remove
motor cover
·
Remove
brushes, machine 201-2
·
Remove
armature, machine 201-2
·
Inspect
and clean the armature, machine 201-2
·
Remove
the field core with coils, machine 201-2
·
Clean
brushes and brush tubes, machine 201-2
·
Inspect
wire connections to brush tubes, machine 201-2
·
Remove
and replace brush tubes, machine 201-2
·
Remove
and replace insulating bushings, machine 201-2
·
Reassemble
the motor, machine 201-2
·
Reassemble
the field core with coils
·
Replace
armature, machine 201-2
·
Replace
brushes, machine 201-2
·
Attach
motor and three-pin terminal, machine 201-2
·
Lubricating
the Motor,
machine 201-2
·
Remove
and replace the balance wheel
,
machine 201-2
·
Remove
and replace the Textolite gear and shock-absorbing spring
,
machine 201-2
·
Inspect
electrical connections, machine 201-3
·
Tree-pin
terminal, machine 201-3
·
Motor,
machine 201-3
·
Singerlight,
machine 201-3
·
Singerlight
fails to light, machine 201-3
·
Remove
and replace the bulb, machine 201-3
·
Tree-pin
terminal, machine 201-3
·
Electrical
outlet plug, machine 201-3
·
Remove
the motor, machine 201-3
·
Disassemble
the motor, machine 201-3
·
Remove
the pulley, machine 201-3
·
Remove
pulley end cover, machine 201-3
·
Remove
the brushes, machine 201-3
·
Remove
the armature, machine 201-3
·
Inspect
and clean the armature, machine 201-3
·
Remove
the field core shield, machine 201-3
·
Inspect
wire connections to brush tubes, machine 201-3
·
Clean
brushes and brush tubes, machine 201-3
·
Reassemble
the motor, machine 201-3
·
Replace
commutator end cover, machine 201-3
·
Replace
field core shield, machine 201-3
·
Replace
armature, machine 201-3
·
Replace
pulley end cover, machine 201-3
·
Replace
brushes, machine 201-3
·
Replace
pulley, machine 201-3
·
Attach
motor, Singerlight and three-pin terminal, machine 201-3
·
Adjust
belt tension, machine 201-3
·
Lubricate
the motor, machine 201-3
·
Singer
Bakelite carbon controller, machines 201-2 and 201-3
·
The
S
inger
Bakelite controller
·
Motor
fails to start
·
Inspect
the carbon resistance unit of the controller
·
Treadle
controller
·
Convertible
foot and knee controller
·
Motor
fails to operate at all speeds
·
Emergency
adjustment of carbon resistance unit
·
Motor
fails to stop
·
Instructions
for machines 201-1, 201-2, 201-3, 201-4 and 1200-1
·
Remove
and replace the rotating hook bobbin case
·
Remove
and replace the feed dog
·
Remove
and replace the rotating hook bobbin case position plate
·
Remove
and replace the rotating hook
·
Time
the rotating hook
·
Set
the needle bar at the correct height
·
Remove
and replace the rotating hook shaft and bevel gear
·
Remove
and replace the rotating hook driving shaft and bevel gears
·
Raise
or lower the feed dog
·
Adjust
the position of the feed dog lengthwise
·
Adjust
the position of the feed dog centrally
·
Remove
and disassemble the graduated tension
·
Reassemble
and replace the graduated tension
·
Adjust
the bobbin winder
·
Adjust
the presser bar
·
Remove
and replace the presser bar
·
Remove
and replace the needle bar
·
Remove
and replace the feed connecting rod
·
Remove
and replace the feed forked connection and feed regulator
·
Remove
and replace the upright arm shaft and gears
·
Remove
and replace the horizontal arm shaft, bushing, gear, cam, eccentric
·
O
iling
the machine
Here
are photos of some of the pages from the manual. You can see the
superb
quality of the print, photos, diagrams, and the paper itself.
P.H.
motor, Singer-light and controller
.
(Photo 04)
Light
fixture assembly. (Photo 07)
Three-pin
terminal
.
(Photo 08)
Motor
assembly. (Photo 10)
Electrical
connections
.
(Photo 12)
Speed
controller
.
(Photo 15)
Timing
the rotating hook
.
(Photo 17)
These
instructions are fairly detailed and utilize illustrations to make it
easy to understand and carry out the instructions. In most cases a
simple tool, like a screwdriver, is needed to do the task. And, once
you know what to do, you may be able to perform the timing or the
adjustment in just a couple of minutes!
These
Instructions are a
MUST
for
every owner
of
a Singer
201-1,
201-2, 201-3, 201-4, 1200-1
Sewing
Machine!
Instruction Manual.  (Photo 01)
Note
for users of “Singer Adjusters Manual for Class 201”
:
Most
people who use this manual also use an additional manual which
includes service information that is directly applicable to Class 201
machines.
This
additional manual is:
“
Illustrated
List of Parts for Class 201
”
(available
at our eBay listing #
191706647363
)
The
additional “Illustrated List of Parts Manual” includes
illustrations of every single component, screw, nut, spring, plate,
rod, hinge, handle, arm, etc. Every internal part of the motor is
shown. Every internal part of the speed control pedal is shown. All
the components and parts of every single accessory are shown. All
these parts and components are illustrated in the proper size with
respect to their actual size and with respect to each other.
This
“
Illustrated
List of Parts for Class 201
”
manual is available at our eBay listing #
191706647363
.
SHIPPING
POLICY
:
The
shipping cost stated above is ONLY for the 50
US
states.
Inquire about shipping cost to
Canada
and
other International locations.
All
orders are shipped next business day after payment is received and
cleared.
FEEDBACK
POLICY
:
We
guarantee to leave all customers positive feedback the next day after
positive feedback is received.
PAYMENT
NOTICE
:
We
accept PayPal. Please note that we ship ONLY to confirmed PayPal
addresses.
Return
Authorization
:
You
may return your entire purchase within 7 days of receipt. Please
request a Return Authorization prior to returning the items. The
items must be returned with all the accessories and in the original
box, with all packing materials. Please insure the shipment against
lose and damage. We will refund your original purchase price, less
shipping and handling fees.
IMPORTANT
NOTE
eBay
5-Star Rating System
:
Due
to eBay’s new Star rating system and it’s lack of explanation and
clarity, I would like to try to give you an insight as to how it
affects our business. You would think that a 4 star rating would be
good as eBay says. Not So! Anything less than a 5 star rating on all
categories might as well be a Negative feedback score. If you are not
completely satisfied with any transaction and believe it to be our
fault, your fault or nobodies fault, contact us and we will take care
of the problem.
Here
is Our promise
:
1.
  We inventory and have in stock every item that we list for
sale.
2.
  We ship every item within 24 to 48 hours.
3.
  We offer the fastest shipping in the industry, and pack each
item securely.
4.
  We offer superior customer support and quick response to your
eBay message or  email.
5.
  We strive to achieve 100% customer satisfaction.